Product application
Deep hole drilling machines are mainly used in the industries as following:
Mould industry: water line hole, thimble hole, ejection pin hole, electric hole, and inclined hole, etc.
-Hydraulic machinery industry: valve, distributor and pump,etc..
-Automotive industry: cylinder, fuel supply system and other parts
-Aerospace industry: the propeller, landing gear and other parts.
-Chemical and generator industry: heat exchange parts.
ZJR series CNC deep-hole drilling machine is automatic and multifunctional, majoring in deep-hole drilling and cutting, while milling function is also professional. With the modern industry advanced technology, the performance, accuracy, processing range, operating mode and working efficiency are in the international advanced level.
1.FANUC 0i -MD CNC system: stable performance, convenient operation programming, perfect and punctual after-sales service.
2.FANUC servo motor for six coordinate axis and main axis: good characteristic and perfect low speed performance.
3.With high-precision ball screw bar and rolling linear guide, the operating components make positioning accurately.
4.Remote control device is adopted in cooling system. Depends on the hole size, materials, chips and required precision, adjusting the flow rate and pressure can optimize the cooling result.
5.ZJR series CNC deep-hole drilling machine is mainly used for extremely difficult processes of deep-hole in mold industry. It's spoken highly of its high-efficiency, low-cost, humanized technological process.
Technical Specifications of
ZJR Series Six-Axis CNC Deep-hole Drilling Machine Tool
| Items |
ZJR10-1210 |
|
| Processing Capacity |
Diameter of the Hole for Gun Drill |
3~30 mm |
|
| Maximum Drilling Depth |
1000 mm
|
|
| Processing Range |
(X)Processing Range (from Left to Right) of the Working Table |
1200 mm |
|
| (Y) Processing Range of Sliding Table |
1000 mm |
|
| (Z) Processing Range of Column |
500 mm |
|
| (A)The Rotary Angle of Ram |
15, 25The Main Axis Turns upward 15 degrees, and down to 25 degrees |
|
| Main Axis |
Taper Hole of Main Axis |
BT40 |
|
| Maximum Speed of Main Axis |
4500 rpm |
|
| Power |
Main Axis Motor |
11 kw |
|
X
X Axis Servo Motor |
22 N.m |
|
Y
Y Axis Servo Motor |
30 N.m |
|
Z
Z Axis Servo Motor |
30 N.m |
|
W
W Axis Servo Motor |
12 N.m |
|
A
A Axis Servo Motor |
22 N.m |
|
B
B Axis Servo Motor |
30 N.m |
|
| Total Power |
65kw |
|
| CNC Index Table |
Burdening |
5 ton |
|
| (×)Measurement |
1000×1000 mm |
|
| Cooling System |
()Pressure Range of Cooling Liquid |
2~15 MPa(Set 2~9 MPa) |
|
| ()Flux of Cooling Liquid |
6~85 L/min |
|
| Measurement & Weight |
(×)Floor Area of Machine Tool(Length*Width) |
6500×5500 mm |
|
| Maximum Height of Machine Tool |
3000 mm |
| Wight of Machine Tool |
16ton |
| System |
CNC System |
FANUC 0i-MF |
|
| Milling Function |
Milling Range |
1400mm |
Audited Supplier 
){kind=link}