| Technical Parameters of Machine Tool |
| No. |
Items |
Contents |
| 1 |
Diameter range |
φ3~φ35mm |
| 2 |
Maximum depth |
2000mm |
| 3 |
Measurement of Operation Platform |
1600×3000mm |
| 4 |
Load of Operation Platform |
5 |
| 5 |
Weight of Machine Tool |
21 |
| 6 |
Measurement of Machine Tool |
7500×6500×3400mm |
| 7 |
Route of Three Axis |
X:3000mm
Operation Platform |
Y:1300mm
Column |
Z:2000mm
Entrance |
| 8 |
()
Speed Adjustment Range of Main Axis |
0~4500r/min |
| 9 |
()
Feed Speed Range of Tools |
0~200mm/min (Non-restrictive data) |
| 10 |
Rapid Speed |
5000mm/min |
| 11 |
Power of Main Axis Motor |
11KW |
| 12 |
Power of Three Axis Servo Motor |
X:27N.m |
Y:27N.m |
Z:15N.m |
| 13 |
Power of Oil Pump |
High-pressure Pump
3.7KW |
Low-pressure Pump
7.5KW |
| 14 |
Power of Chip Conveyor |
0.2KW |
| 15 |
Power of Oil Temperature Control System |
3P |
| 16 |
Total Power of Machine Tool |
36KW |
| 17 |
Pressure of Oil Cutting |
10Mpa |
| 18 |
Capacity of Oil Tank |
600L |
| 19 |
Quantity of Main Axis |
1 |
| 20 |
Precision of Hole |
IT8~IT11 |
| 21 |
Harshness of Hole Surface |
Ra ≤3.2μm |
| 22 |
Tolerance between the Hole Axis and Standard |
0.5/1000(S45#,10mm) |
| 23 |
Precision of Filter |
20μm |
| 24 |
T Operation Platform T Groove |
18mm |
| 25 |
Quantity of Shockproof Support |
3pcs |
The base of machine tool is made of resin sand cast, which is twice qualitative treated. There are three main parts: base, column and entering sliding table. Imported ball screw and guide rail are installed in every part, and it runs by the high-precision Servo Motor.
The base includes operating platform, Servo Motor, lubricating system, protecting cover, etc. The operating platform moves along the direction of X axis horizontally.
The column includes Servo Motor, counterweighing, etc. The entering sliding table moves up and down along the direction of Y axis.
The sliding table includes main axis and its motor gears, Servo Motor, anti-hunting support for gun drill and its automatic regulating device, gun drill guide and chip conveyor, stabilizer of hydraulic system, etc. The gun drill moves along the direction of Z axis horizontally.
The main axis part consists an axis kit. The main axis is driven by the gear belt wheels and make rotational motion. There is an imported high-speed and high-pressure rotary connector behind the main axis, in order to ensure no leakage of cutting oil when the main axis runs in high speed. There is also hydraulic overload protecting function, and the components can be well protected in case of any improper operation.
It is a special deep-hole drilling operating system, which is powerful, simple operating, stable and durable. Main advantages:
Multi - segments processing automatically: It will adjust the feed rate automatically according to the processing schedule.
Logical control processing: The processing situation is monitored and the processing specification will be adjusted automatically if any unusual.
The highly sensitive monitoring equipment will sound a alarm if any unusual errors and stop processing, which is safe and found intuitively.
Multiple operation. There are optional modes: man-machine dialogue mode, machine programming mode and remote transmission mode.
Audited Supplier 
){kind=link}